Upsc Ese

UPSC ESE Prelims Exam Date 2027 Out : Check Official Schedule

By /

Union Public Service Commission (UPSC) ने Engineering Services (Preliminary) Examination 2027 की Exam Date आधिकारिक रूप से जारी कर दी है। UPSC ESE Prelims परीक्षा का आयोजन 31st January 2027 (Sunday) को देशभर के विभिन्न Examination Centres पर किया जाएगा। इस Recruitment Drive के तहत कुल 480 Vacancies भरी जाएंगी।

UPSC Engineering Services Preliminary Examination दो Papers में आयोजित होगी। Paper-I यानी General Studies And Engineering Aptitude की परीक्षा सुबह 09:30 AM से 11:30 AM तक होगी, जबकि Paper-II यानी Civil, Mechanical, Electrical, Electronics & Telecom Engineering का आयोजन दोपहर 02:00 PM से 05:00 PM तक किया जाएगा। Candidates को सलाह दी जाती है कि वे Exam Schedule के अनुसार अपनी Preparation पूरी करें और परीक्षा से संबंधित सभी जरूरी Updates के लिए UPSC की Official Website पर नजर बनाए रखें।

UPSC ESE Prelims Exam Date 2027 : Overview

UPSC Engineering Services Pre Exam 2026 की तैयारी शुरू करने से पहले उससे जुड़ी हुई कुछ ज़रूरी जानकारियों को समझना Important है। नीचे दी गई Table में Organisation Name, Vacancy, Salary, और Official Website जैसी जानकारियों का Overview दिया गया है।

Particulars Details
Organization Name Union Public Service Commission (UPSC)
Exam Name Engineering Service Examination 2027
Examination Notice No. 02/2027 ENGG.
Category
  • Category I: Civil Engineering
  • Category II: Mechanical Engineering
  • Category III: Electrical Engineering
  • Category IV: Electronics & Telecommunication Engineering
Total Vacancy  480
Prelims Exam Dates 31st January 2027 (Sunday)
Selection Process
  • Prelims
  • Mains
  • Interview
Application Fees
  • General/OBC/EWS: ₹200
  • Female/SC/ST/PwBD Candidates: Exempted
Salary  As Per Government Rules
Official Website www.upsc.gov.in

UPSC ESE Prelims Exam Pattern:

UPSC Engineering Services Preliminary Examination Stage-I में दो Papers शामिल होंगे। Paper-I में General Studies And Engineering Aptitude से Questions पूछे जाएंगे, जबकि Paper-II Candidates की Selected Engineering Discipline पर Based होगा। दोनों Papers Objective Type होंगे। परीक्षा का कुल Duration 5 Hours होगा और इसमें कुल 500 Marks होंगे।

Category Paper Subject Duration Marks
 

Civil Engineering

 Paper-I General Studies And Engineering Aptitude 2 Hours 200
Paper-II Civil Engineering 3 Hours 300
Total 500
Mechanical Engineering Paper-I General Studies And Engineering Aptitude 2 Hours 200
Paper-II Mechanical Engineering 3 Hours 300
 Total 500
 

Electrical Engineering

 Paper-I General Studies And Engineering Aptitude 2 Hours 200
Paper-II Electrical Engineering 3 Hours 300
Total 500
 

Electronics & Telecommunication

 Paper-I General Studies And Engineering Aptitude 2 Hours 200
Paper-II Electronics & Telecommunication Engineering 3 Hours 300
Total 500

Important Details:

Particular Details
Negative Marking 1/3 Marks Will Be Deducted For Each Wrong Answer
Multiple Answers Selecting More Than One Option Will Be Treated As A Wrong Answer
Unanswered Questions No Penalty For Unattempted Questions
Question Type Objective Type (MCQs) With Four Alternative Options
Answering Mode Candidates Must Mark Their Answers On The OMR Answer Sheet
Required Pen Black Ball Pen Only
Permitted Items Clipboard Or Hard Board And Black Ball Pen
Calculator Usage Calculators Are Not Allowed For Objective Type Papers. Candidates Must Not Bring Calculators Into The Examination Hall.

UPSC Engineering Services Prelims Exam: Syllabus

UPSC Engineering Services Prelims Examination 2027 में दो Papers होंगे। Paper-I में General Studies And Engineering Aptitude से Questions पूछे जाएंगे, जो सभी Engineering Branches के Candidates के लिए Common होगा। Paper-II में Candidates की Selected Engineering Discipline के अनुसार Questions पूछे जाएंगे। नीचे सभी चार Engineering Categories के Important Syllabus Topics दिए गए हैं:

Paper Branch Topics
Paper I General Studies And Engineering Aptitude (Common For All Candidates)
  • Current Issues Of National And International Importance Relating To Social, Economic And Industrial Development
  • Engineering Aptitude Covering Logical Reasoning And Analytical Ability
  • Engineering Mathematics And Numerical Analysis
  • General Principles Of Design And Drawing, And Importance Of Safety
  • Standards And Quality Practices In Production, Construction, Maintenance And Services
  • Basics Of Energy And Environment: Conservation, Environmental Pollution And Degradation, Climate Change, And Environmental Impact Assessment
  • Basics Of Project Management
  • Basics Of Material Science And Engineering
  • Information And Communication Technologies (ICT) Based Tools And Their Applications In Engineering, Such As Networking, E-Governance And Technology-Based Education
  • Ethics And Values In Engineering Profession
Paper II Civil Engineering
  • Building Materials
  • Solid Mechanics
  • Structural Analysis
  • Design of Steel Structures
  • Design of Concrete and Masonry Structures
  • Construction Practice, Planning and Management
  • Fluid Mechanics and Open Channel Flow
  • Hydraulic Machines and Hydropower
  • Hydrology and Water Resources Engineering
  • Environmental Engineering
  • Geotechnical Engineering
  • Foundation Engineering
  • Surveying and Geology
  • Transportation Engineering
Paper II Mechanical Engineering
  • Fluid Mechanics
  • Thermodynamics and Heat Transfer
  • IC Engines, Refrigeration and Air Conditioning
  • Turbo Machinery
  • Power Plant Engineering
  • Renewable Sources of Energy
  • Engineering Mechanics
  • Engineering Materials
  • Mechanisms and Machines
  • Design of Machine Elements
  • Manufacturing, Industrial and Maintenance Engineering
  • Mechatronics and Robotics
Paper II Electrical Engineering
  • Engineering Mathematics
  • Electrical Materials
  • Electric Circuits and Fields
  • Electrical and Electronic Measurements
  • Computer Fundamentals
  • Basic Electronics Engineering
  • Analog and Digital Electronics
  • Systems and Signal Processing
  • Control Systems
  • Electrical Machines
  • Power Systems
  • Power Electronics and Drives
Paper II Electronics And Telecommunication Engineering
  • Basic Electronics Engineering
  • Basic Electrical Engineering
  • Materials Science
  • Electronic Measurements and Instrumentation
  • Network Theory
  • Analog and Digital Circuits
  • Analog and Digital Communication Systems
  • Control Systems
  • Computer Organization and Architecture
  • Electromagnetics
  • Advanced Electronics Topics
  • Advanced Communication Topics

Click Here To Check Syllabus Pdf

Important Note For Paper I- General Studies And Engineering Aptitude (Common For All Candidates):
  • Questions Will Be Asked From All 10 Topics.
  • The Marks Allotted To Each Topic May Range From 5% To 15% Of The Total Marks In Paper I.
  • The Standard Of Questions Will Be Equivalent To The Knowledge Expected From An Engineering Graduate, Without Special Preparation.

What’s Next After Prelims Exam?

  • Provisional Answer Key: UPSC सबसे पहले Prelims Exam की Provisional Answer Key जारी करेगा| Candidates को Question Paper और Provisional Answer Key पर Online Objections दर्ज करने का मौका मिलेगा| Objections परीक्षा के तीसरे दिन से सातवें दिन शाम 6:00 बजे तक Submit करनी होंगी|
  • Mains Exam: Prelims Exam में Minimum Qualifying Marks प्राप्त करने वाले Candidates को Stage-II (Mains) Examination के लिए Shortlist किया जाएगा| Mains Examination Qualify करने वाले Candidates को Stage-III (Personality Test/Interview) के लिए बुलाया जाएगा|
  • Interview: Interview कुल 200 Marks का होगा, जिसमें कोई Minimum Qualifying Marks निर्धारित नहीं हैं|
  • Final Ranking Prelims, Mains और Interview में प्राप्त कुल Marks के आधार पर तय की जाएगी| Candidates को उनकी Final Rank और Service Preferences के आधार पर विभिन्न Services Allot की जाएंगी|

Stage-II: Main Examination

UPSC Engineering Services (Main) Examination 2026 में कुल 2 Conventional Papers होंगे, जो Engineering Discipline-specific होंगे। प्रत्येक Paper 300 Marks का होगा और 3 घंटे की Duration दी जाएगी। इस प्रकार Stage-II परीक्षा कुल 600 Marks की होगी। सभी Conventional Papers के Answers English में ही लिखने होंगे, क्योंकि Question Papers भी केवल English में ही उपलब्ध होंगे। Stage-II का Detailed Exam Pattern नीचे दिया गया है।

Category Paper Duration Maximum Marks
Civil Engineering Paper-I (Civil Engineering) 3 Hours 300
Paper-II (Civil Engineering) 3 Hours 300
Total 600
Mechanical Engineering Paper-I (Mechanical Engineering) 3 Hours 300
Paper-II (Mechanical Engineering) 3 Hours 300
Total 600
Electrical Engineering Paper-I (Electrical Engineering) 3 Hours 300
Paper-II (Electrical Engineering) 3 Hours 300
Total 600
Electronics & Telecommunication Engineering Paper-I (Electronics & Telecommunication Engineering) 3 Hours 300
Paper-II (Electronics & Telecommunication Engineering) 3 Hours 300
Total 600

Stage-III: Personality Test/Interview (200 Marks)

  • Main Examination Qualify करने वाले Candidates को Stage-III (Personality Test/Interview) के लिए बुलाया जाएगा| Interview कुल 200 Marks का होगा और इसके लिए कुल Vacancies की लगभग दोगुनी संख्या में Candidates को Shortlist किया जाएगा|
  • Personality Test में Candidates की Leadership Skills, Initiative, Intellectual Curiosity, Social Qualities, Mental And Physical Energy, Practical Knowledge और Integrity को Assess किया जाएगा| इस Stage में Candidates की Decision-Making Ability, Communication Skills और Overall Personality पर भी ध्यान दिया जाएगा|

UPSC Engineering Services Prelims: Exam Schedule

UPSC Engineering Services Prelims Exam 31st January 2027 (Sunday) को आयोजित किया जाएगा। परीक्षा दो Shifts में होगी, जिसमें पहला Paper General Studies And Engineering Aptitude का होगा और दूसरा Paper Branch-Specific होगा। Candidates नीचे दिए गए Table में पूरा Exam Schedule और Timing देख सकते हैं।

Date And Day Time Subject Duration Maximum Marks
31st January 2027 (Sunday) 09:30 AM To 11:30 AM General Studies And Engineering Aptitude (Paper-I) (Objective) 2 Hours 200
02:00 PM To 05:00 PM Civil, Mechanical, Electrical, Electronics And Telecommunication Engineering (Paper-II) (Objective) 3 Hours 300

UPSC Engineering Services Prelims: Branch Codes

Engineering Branch Subject Subject Code
Common For All Branches General Studies And Engineering Aptitude (Paper-I) 01
Civil Engineering Civil Engineering (Paper-II) 11
Mechanical Engineering Mechanical Engineering (Paper-II) 21
Electrical Engineering Electrical Engineering (Paper-II) 31
Electronics And Telecommunication Engineering Electronics And Telecommunication Engineering (Paper-II) 41

Preparation Tips:

  • Understand The Exam Pattern: Prelims Exam के दोनों Papers, Marking Scheme और Syllabus को अच्छी तरह समझें|
  • Focus On General Studies And Engineering Aptitude: Paper-I के लिए Current Affairs, Logical Reasoning, Engineering Mathematics और Environmental Studies की नियमित तैयारी करें|
  • Strengthen Technical Subjects: अपनी Engineering Branch के सभी Important Topics और Core Concepts पर ज्यादा Focus करें|
  • Solve Previous Year Question Papers: Previous Year Questions Solve करें, इससे Important Topics, Exam Pattern और Question Difficulty को समझने में मदद मिलेगी|
  • Practice Mock Tests: Regular Mock Tests दें और अपनी Speed, Accuracy और Time Management Improve करें|
  • Manage Negative Marking: Objective Questions Attempt करते समय Accuracy पर ध्यान दें और बिना सोचे-समझे Answers Mark न करें|
Get the Latest Government Job News First! Join Us Now!!

FAQs:

Q1. How Many Vacancies Are Available Under UPSC Engineering Services Recruitment 2027?
Answer: A Total Of 480 Vacancies Have Been Announced.
Q2. When Will The UPSC Engineering Services Prelims Exam 2027 Be Conducted?
Answer: The Prelims Exam Will Be Held On 31st January 2027 (Sunday).
Q3. Is There Any Negative Marking In The Prelims Exam?
Answer: Yes, 1/3 Marks Will Be Deducted For Each Wrong Answer.
Q4. Which Pen Is Allowed In The UPSC Engineering Services Examination?
Answer:  Candidates Must Use A Black Ballpoint Pen Only.
Q5. How Many Papers Are There In The Prelims Examination?
Answer:  There Are Two Objective-Type Papers: General Studies And Engineering Aptitude (200 Marks) And Branch-Specific Paper (300 Marks).

Leave a Comment

Your email address will not be published. Required fields are marked *

Related Posts

Table of Contents

→ Index
Exit mobile version