Ssc Je 2026 Exam Date Out, Check Now!!

SSC JE 2026 Exam Date Out, Check Now!!

By /

Staff Selection Commission (SSC) ने Junior Engineer Examination, 2026 (Paper-I) के लिए official Exam Date Notice जारी कर दिया है। जारी किए गए आधिकारिक शेड्यूल के अनुसार, Junior Engineer (Civil, Mechanical, and Electrical) पदों के लिए Paper-I (Computer Based Examination) का आयोजन 02 नवंबर 2026 से 06 नवंबर 2026 तक किया जाएगा।

सरकारी क्षेत्र में अपना Career बनाने की इच्छा रखने वाले Engineering Graduates और Diploma Holders के लिए यह एक महत्वपूर्ण Update है। इस Recruitment Drive के माध्यम से Central Public Works Department (CPWD), Central Water Commission (CWC) और Military Engineer Services (MES) जैसे प्रतिष्ठित सरकारी विभागों में रिक्त पदों को भरा जाएगा।

Candidates के लिए Online Application प्रक्रिया 02.09.2026 से 22.09.2026 तक खुली थी। Selection Process दो चरणों में आयोजित की जाएगी—Paper-I (CBE) 02 से 06 नवंबर 2026 तक आयोजित होगा और इसके बाद Paper-II दिसंबर 2026 में आयोजित किया जाएगा।

SSC JE 2026 Exam Date Out: Overview Table

Details Information
Organisation Name Staff Selection Commission
Advertisement Number F. No. HQ-C-3019/1/2026-C-3
Post
  • Junior Engineer (Civil, Mechanical
  • Electrical, Electrical & Mechanical, Telecom) 
  • Scientific Assistant (IMD)
Vacancy 1748 (Tentative)
Paper 1 Exam Date 2 November- 6 November, 2026
Salary Level-6 (Rs. 35400-112400/-)
Selection Process
  • Paper-I (CBE) 
  • Paper-II (CBE)
Website Link https://ssc.gov.in

SSC JE 2026 Exam Date Out: Selection Process

SSC JE 2026 Exam Date Out: Exam Pattern In Details

यहाँ SSC JE 2026 के पेपर-1 और पेपर-2 CBT का पूरा एग्जाम पैटर्न दिया गया है:

Paper Type of Exam Subjects / Modules Questions / Marks Negative Marking
Paper-I Computer Based (Objective) (i) General Intelligence & Reasoning

(ii) General Awareness

(iii) Technical Stream (Civil / Elec / Mech)

 50 Qs / 50 Marks

50 Qs / 50 Marks

100 Qs / 100 Marks

 0.25 Marks per wrong answer
Paper-II Computer Based (Objective) Specific Engineering Stream (Civil / Electrical / Mechanical) 100 Qs / 300 Marks 1.00 Mark per wrong

SSC JE 2026 Exam Date Out: Syllabus In Detail

इस सेक्शन में SSC JE 2026 परीक्षा के पेपर-1 और पेपर-2 का विस्तृत Syllabus दिया गया है:

Paper-I Detailed Syllabus

Non-Technical Sections

Subject Topics Covered
General Intelligence & Reasoning
  • Analogies
  • Similarities & Differences
  • Space Visualization
  • Problem Solving
  • Analysis & Judgment
  • Visual Memory
  • Discrimination
  • Observation
  • Relationship Concepts
  • Arithmetical Reasoning
  • Verbal & Figure Classification
  • Arithmetical Number Series
General Awareness
  • Current Events
  • Everyday Science & Observations
  • India and Neighboring Countries
  • History
  • Culture
  • Geography
  • Economic Scene
  • General Polity
  • Scientific Research

General Engineering

Engineering Branch Topics Covered
Part-A: Civil Engineering
  • Engineering Mechanics
  • Solid Mechanics
  • Structural Analysis
  • Construction Materials & Management
  • Estimating, Costing & Valuation
  • Concrete & Steel Structures
  • Surveying
  • Soil Mechanics (Geotechnical Engineering)
  • Fluid Mechanics & Hydraulics
  • Hydrology & Irrigation Engineering
  • Environmental & Transportation Engineering
Part-B: Electrical Engineering
  • Basic Electrical Engineering Fundamentals
  • Magnetic Circuits
  • A.C. Fundamentals
  • Measurement & Measuring Instruments
  • Electrical Machines & Special Electric Machines
  • Power Generation, Transmission & Distribution
  • Estimation & Costing
Part-C: Mechanical Engineering
  • Engineering Mechanics
  • Strength of Materials
  • Theory of Machines
  • Machine Design
  • Materials Science & Engineering
  • Thermal Engineering
  • Fluid Mechanics & Hydraulic Machinery
  • Industrial Engineering
  • Manufacturing Engineering
  • Metrology & Measurement
  • Advanced Manufacturing Processes

Paper-II Detailed Syllabus

Civil & Structural Engineering

Subject Area Detailed Topics
Engineering Mechanics & Solid Mechanics
  • System of forces
  • Free-body diagrams
  • Equilibrium equations
  • Friction
  • Centre of mass
  • Moment of Inertia
  • Bending moment & shear force
  • Simple stress & strain
  • Simple bending theory
  • Torsion
  • Buckling of column
Structural Analysis & Materials
  • Statically determinate & indeterminate structures
  • Method of superposition
  • Trusses
  • Arches
  • Beams
  • Frames
  • Bricks
  • Stones
  • Timber
  • Steel
  • Cement
  • Concrete mix design
  • PERT & CPM
Estimating, Costing & Design
  • Rate Analysis
  • Valuation
  • Detailed Estimates
  • Working stress & Limit State design (Beams, Slabs, Columns, Bolted & Welded connections)
Surveying & Geotechnical Engineering
  • Chain & Compass survey
  • Levelling
  • Total station
  • Index properties of soil
  • Permeability
  • Shear Strength
Hydraulics & Environmental Engineering
  • Continuity & energy equations
  • Channel Hydraulics
  • Hydrologic cycle
  • Hydrograph analysis
  • Crop water requirements
  • Water quality standards
  • Sewerage system design
  • Air Pollution
  • Solid Waste Management
Transportation Infrastructure
  • Highway geometric design
  • Pavement design using IRC codes
  • Traffic studies
  • Signal design

Electrical Engineering

Subject Area Detailed Topics
Networks & Circuits
  • KCL
  • KVL
  • Node & Mesh Analysis
  • Thevenin’s Theorem
  • Norton’s Theorem
  • Superposition Theorem
  • Maximum Power Transfer Theorem
  • Flux
  • Reluctance
  • Inductance
  • RMS & Average Values
  • Series/Parallel AC Circuits
  • Star-Delta transformation
Instruments & Electrical Machines
  • Galvanometer
  • Ammeter
  • Voltmeter
  • Wattmeter
  • Energy Meter
  • Single-Phase & Three-Phase Transformers
  • DC Machines
  • Induction Motors
Power Systems & Electronics
  • Load Factor
  • Circuit Breakers
  • Earthing Practices
  • Illumination
  • Diodes
  • BJT
  • FET
  • Thyristor
  • Converters

Mechanical Engineering

Subject Area Detailed Topics
Mechanics, Materials & Design
  • Lami’s Theorem
  • Shear Force & Bending Moment
  • Torsion of Shafts
  • Thin Cylindrical Shells
  • Cams
  • Gears
  • Flywheels
  • Governors
  • Design of Joints
  • Shafts
  • Springs
  • Bearings
Thermal & Fluid Engineering
  • Laws of Thermodynamics
  • Thermal Power Plant
  • IC Engines
  • Refrigeration
  • Fluid Flow
  • Pumps & Turbines
Manufacturing & Industrial Engineering
  • Casting
  • Welding
  • Lathe Operations
  • Jigs & Fixture
  • CNC Machines
  • Work Study
  • Inventory Control

What After the Exam ?

परीक्षा के दोनों चरण पूरे होने के बाद आगे की प्रक्रिया इस प्रकार होगी:

  • Paper-I Result & CBT-2 Call: Paper-I (CBE) होने के बाद Official Website पर Tentative Answer Key आएगी। आपत्ति दर्ज कराने और Result आने के बाद, Paper-I क्लियर करने वाले Candidates को Paper-II (CBE – Dec 2026) के लिए बुलाया जाएगा।
  • Paper-II Examination: Shortlist हुए Candidates Paper-II देंगे। यह Exam आपकी अपनी Engineering Branch (Civil / Electrical / Mechanical) का 300 marks का Objective Paper होगा।
  • Final Result: Paper-II के बाद Final Answer Key आएगी और Paper-I व Paper-II दोनों के Marks जोड़कर Final Result और Cut-Off जारी की जाएगी।
  • Document Verification (DV): Shortlist उम्मीदवारों के Documents (Marksheets, Caste Certificate, Experience आदि) की जांच  User Department द्वारा की जाएगी।
  • Final Selection: DV क्लियर करने के बाद Candidates को Final Merit List के आधार पर Respective Departments में Join  करने के लिए  Appointment Letter दे दिया जाएगा।

Last Minute Preparation Tips

परीक्षा में बेहतर प्रदर्शन के लिए उम्मीदवारों को इन बातों का ध्यान रखना चाहिए:

  • Time Management: CBT Exam के दौरान टाइम को सही से Divide करें, ताकि समय रहते आप सभी आसान और स्कोरिंग Questions अटेंप्ट कर सकें।
  • Avoid Negative Marking: Paper-1 में 0.25 marks और Paper-2 में 1 mark की Negative Marking है, इसलिए जिन प्रश्नों पर पक्का भरोसा न हो, उन पर तुक्का लगाने से बचें।
  • Practice On-Screen Tools: Exam console पर मिलने वाले on-screen calculator और code Tables को यूज़ करने की प्रैक्टिस पहले से ही मॉक टेस्ट में कर लें।
  • Follow Official Updates: किसी भी नए अपडेट, शेड्यूल या बदलाव के लिए सिर्फ SSC की आधिकारिक वेबसाइट ([https://ssc.gov.in](https://ssc.gov.in)) पर ही भरोसा करें।

FAQs

Q1. What is the educational qualification required for SSC JE 2026?
ANS. Candidates must hold a Diploma or Degree in Civil, Mechanical, or Electrical Engineering from a recognized University or Institution.
Q2. What are the online application start and end dates for SSC JE 2026?
ANS. The online application process starts on September 2, 2026, and the last date to submit the application form is September 22, 2026.
Q3. What is the age limit to apply for SSC Junior Engineer posts?
ANS. The upper age limit is generally up to 30 or 32 years (depending on the specific post and department). Age relaxation is applicable for reserved categories as per Government rules.
Q4. What is the examination scheme and selection process for SSC JE?
ANS. The selection process consists of two stages: Paper-I (Computer Based Examination) followed by Paper-II (Computer Based Examination), and final Document Verification (DV) by user departments.
Q5. Is there any negative marking in SSC JE Paper-I and Paper-II?
ANS. Yes, there is a negative marking of 0.25 marks for each wrong answer in Paper-I, and 1.0 mark for each incorrect answer in Paper-II.
Q6. What is the application fee for SSC JE recruitment?
ANS. The application fee is ₹100 for General/OBC candidates. Women candidates and candidates belonging to SC, ST, PwBD, and Ex-Servicemen categories are exempted from paying the fee.

Leave a Comment

Your email address will not be published. Required fields are marked *

Related Posts

Table of Contents

→ Index
Exit mobile version